1, the overall structure, two S-shaped blades formed inside the maximum flow path, and one with the nozzle body casting. The benefits of using this type of structure as follows: In the case of the same flow, XY-MP type nozzle, which allows the diameter of the solid particles by higher than normal solid cone nozzle 3 times. 2, unique design, maximizing avoid the plain nozzle under harsh working conditions clogging problems, especially for spraying large flow of slurry containing particulate impurities, easily transported dirty, lumpy liquid substances, such as lime slurry. 3, low pressure to 0.2 bar can be an effective spray. Internal channels are streamlined, so that the liquid through a more smooth, no dead ends, no plug, effectively reducing the liquid atomization pressure. 4, S-shaped blades diversion effect, avoiding the layered spiral spray nozzle, spray makes more uniform and comprehensive. 5, the internal thread or external thread connection, from 3/8 inch to 4 inches, you can also choose the flange connection. 6, the material can be used: brass, 303 stainless steel, 316L stainless steel, Teflon (PTFE) and PP. 7, the spray angle: 30 °, 60 °, 90 ° and 120 °. 8, the flow can be from 2.45 L / min to 3400 L / min, and the maximum of 17000L/min be based on user needs.